Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
1
Removing the Existing
Side-Discharge Chute
No Parts Required
Procedure
1. Shut off the engine, wait for all moving parts to stop,
engage the parking brake, and remove the key.
2. Remove the locknut, bolt, spring, and spacer holding
the grass deflector to the pivot brackets
Remove the grass deflector.
Description
No parts required
Side-discharge chute
Bolt (5/16 x 7-1/2 inch)
Locknut (5/16 inch)
Spacer
Spring
Handle assembly
Bolt (3/8 x 1 inch)
Nut (3/8 inch)
Cable tie
Trash bag
(Figure
Qty.
–
1
1
1
1
1
1
2
2
3
1
1. Bolt
2. Grass deflector
3. Spacer
1).
2
Use
Remove the existing side-discharge
chute.
Install the side-discharge chute.
Install the handle.
Route the cables.
Install the trash bag.
Figure 1
4. Spring
5. Locknut
Advertisement
