Removal And Replacement Procedures Preliminary Requirements; Tools Required; Service Considerations; Plastic Parts - HP OMEN Maintenance And Service Manual
Hide thumbs
Also See for OMEN:
- Maintenance and service manual (112 pages) ,
- User manual (38 pages) ,
- Setup instructions (15 pages)
Table of Contents
Advertisement
4
Removal and replacement procedures
preliminary requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
Phillips P0 and P1 screwdrivers
●
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE:
As you remove each subassembly from the computer, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
when handling the plastic
24
Chapter 4 Removal and replacement procedures preliminary requirements
Using excessive force during disassembly and reassembly can damage plastic parts. Use care
- Quick Links:
- Product Description
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the OMEN and is the answer not in the manual?
Questions and answers