Resting Position - Tar River BDR-135 Operator's Manual

Resting Position

The mower in the resting position is completely separated from the tractor's suspension system. The mower is repo-
sitioned from the transport position to the resting position.
The following should be done for that purpose:

With the three point suspension system, the support of the mower should be lowered and secured with a cotter.

Lower the mower and rest it on the stump jumper discs and the support.

Disengage the engine and pull out the key from the ignition and set the brakes.

Disconnect the pivotal end of the tractor's upper connector from the suspension frame yoke.

Take down the tractor's push rod ball joint from the suspension frame pins.
17