Tar River BDR-135 Operator's Manual page 21

The greasing points indicated by triangles should be greased with a machine oil with the help of a lubricator.
The PTO shaft should be lubricated in accordance with the shaft manufacturer's requirements.
REMEMBER: The higher quality and viscosity 90 Wt. gear oil should be used or alter nately 140
Wt. gear oil.
Storing
The mower should be stored in a dry, hardened surface and roofed place that is of limited accessibility to people and
animals.
In case the mower is exposed to adverse weather conditions, it is necessary to perform maintenance and lubricating
on the machine.
Check the stability of the mower after placing it in the storage place. Positioning the mower on a soft and uneven
surface may be hazardous.
21