Assembly Of Mower - Tar River BDR-135 Operator's Manual

Assembly of the Mower
The manufacturer delivers a mower with the cutting system's cover that is not assembled.
The responsibility to install the covers is on the side of the purchaser.
Operating the mower with the cutting system's cover not installed or damaged or with the shield lifted is
hazardous to the operators and the environment.
The cover should be installed in the following way:

Unscrew the bolts M10x25 (Position 1 of the drawing below).

Screw in the brackets with the rest of the covers of the upper frame (Position 2 of the drawing below).
1
2
23