Introduction - Tar River BDR-135 Operator's Manual

INTRODUCTION

Thank you for purchasing your Tar River Drum Mower. This Operator's Manual is available with every machine for
the purpose of introducing the user to the design, maintenance, and adjustment of the mower. It will also warn
against any possible threats. The Operator's Manual includes information regarding the adjustment and transport on
the public roads.
Following the instructions carefully will ensure many years of damage-free and safe operation and will result in de-
creasing of the operational costs of the machine.
If you have any questions after reading this manual, please contact the Sales Representative or the Sales and Market-
ing Department.
To emphasize the importance of the information and the warnings of possible hazards, the following warning symbol
with a description has been used:
If you see this symbol, be aware of a threat, carefully read the appropriate information and inform other operators
about it.
The mower has a name plate placed on the middle frame with basic machine identification infor-
mation.
The warrantee proceedings rules and the rules resulting from them are written in the warrantee card, which is an inte-
gral part of the Operator's Manual.
The Operator's Manual is part of the basic equipment of the machine and it should be kept for future use.
PRODUCT PURPOSE
The purpose of the Drum Mower is to be used in farming to mow the low stem green fodder (alfalfa grass, etc.) in the
fields and meadows.
Operating the mower in alternate conditions will be considered a misuse. Strict compliance with the requirements for
the use of the machine as well as its servicing and repairs by the manufacturer is a prerequisite for the intended use.
The machine should be used, operated and maintained only by persons who are familiarized with its specifics as well
as with the work safety proceedings rules.
The provisions regarding preventing accidents and all basic work safety and hygiene rules as well as the traffic regu-
lations must always be observed.
Any changes made to the machine without the consent of the manufacturer will exempt the manufacturer from the
responsibility for any possible damages resulting from them.
3