Partial Risks - Tar River BDR-135 Operator's Manual

PARTIAL RISKS

The manufacturer has made every effort to ensure that the design and the intended method of operating the mower
does not cause any danger to people and their environment.
Due to the nature of the mower and the lack of such opportunities to fully expose the cutter, certain elements of risk
can occur.
THE DANGER caused by the pr esence of the shar p edges of the cutting system and the possi-
bilities of any hard objects thrown out, e.g. stones, broken blades, etc. The danger zone resulting
from the possibility of throwing out hard objects is within 150 ft. perimeter from the mower being
operated.
DANGER the wor king cylinder s and the blades ar e still r otating for a certain amount of time
even after the power drive of the mower is turned off. Therefore, before proceeding with any work
activities on the mower, it is crucial to wait until the operating drums with the blades stop rotating.
DANGER changing the mower 's position fr om the tr anspor t position to the oper ating posi-
tion and backwards may be performed only on an even and flat surface after prior leveling of the
machine. Failure to comply with these conditions may cause the cutting system of the mower turn
around on its own on the suspension and hit or deform the operating elements of the tractor.
SAFETY SIGNS AND INSCRIPTIONS
There are warning labels placed on the mower with safety signs in the form of pictograms, which give clear instruc-
tions and comments informing about what should be treated with special precaution in order for the operation of the
mower to be safe.
Carefully read every warning label and get familiarized with their meaning.
The warning labels should be kept clean and readable throughout the whole life of operating the mower. In case the
warning labels are not readable, the damaged labels should be replaced with new ones.
New systems and parts replaced during any repairs should have all required warning labels. The new labels may be
obtained from stores or from the manufacturer, as it is done with any other spare parts.
5