Date And Time; Operation Time Counter; Power Loss Counter - COMAC CAL FLOW 38Imp Batch Manual

Date and time

This menu item is in DD/MM/RRRR HH/MM formats
Use the and buttons to set the menu item on the display and press the E to edit. Implement settings
in a standard way, using the setting buttons and confirm by pressing the E button.
It is necessary again to confirm the change.

Operation time counter

The counter registers the operation time of the meter (switching on). The first line indicates the date
when the last counter reset was performed and the second line indicates the length of operation in days,
hours and minutes.
This counter can be reset by pressing the E button when necessary.

Power loss counter

The counter registers the time of loss of power time for the meter. The first line indicates the date when
the last reset of power loss counter was performed and the second line indicates the length of time when
the meter was out of operation in days, hours and minutes. The counter can be reset again by pressing
the E button.
Technical and installation
manual FLOW 38 Batch (impulse) Page 15 (total 26) COMAC CAL s.r.o.