Figure 69. Removing front panel from the chassis
Procedure
1. Install a new front panel, see
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install the front panel
Follow this procedure to install the front panel.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
About this task
Attention:
ThinkSystem ST50 V2 Maintenance Manual
90
"Install the front panel" on page
90.