Lenovo ThinkSystem ST50 V2 Maintenance Manual page 80

Figure 54. Removing the optical drive bezel
After you finish
1. Install a new optical drive, see
2. If no optical drive is to be installed, install the optical drive bay shield back to front bezel.
a. Engage the bottom of the shield to the opening on the front bezel.
b. Pivot the shield towards the front bezel until it snaps into place.
Figure 55. Installing the optical drive bay shield
3. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install an optical drive
Follow this procedure to install an optical drive.
ThinkSystem ST50 V2 Maintenance Manual
72
"Install an optical drive" on page 72