Lenovo ThinkSystem ST50 V2 Maintenance Manual page 82

Hide thumbs Also See for ThinkSystem ST50 V2:
Table of Contents

Advertisement

Figure 56. Removing the optical drive bay shield
Step 2.
(Optional) Install the optical drive retainer.
a.
Align the pin on the bottom of the retainer and the corresponding slot on the optical drive,
then insert the pin into the slot.
b.
Insert the rest two pins on retainer to the corresponding slots on the optical drive.
Figure 57. Installing the retainer to the optical drive
Step 3.
(Optional) Align the optical drive bezel with the slots on the optical drive; then, insert the bezel into
the optical drive.
ThinkSystem ST50 V2 Maintenance Manual
74

Advertisement

Table of Contents
loading

Table of Contents