Quick Start - iHome iP71 User Manual

Quick Start: Connections
1:power
RESET R
SET E
TEST T
ST E
Attach the AC adaptor cable to
the jack on the back of the left
speaker and plug the other end
into a working wall socket.
Use this insert
For this
iPhone/iPod
NOTE: If you do not have an insert for your iPhone/iPod, please visit
www.ihomeaudio.com or call iHome toll free at 800-288-2792 to purchase one
4:iPhone/iPod
2:connections
1) Connect the left and right speaker
using the included speaker cable.
The arrows on the plugs should face
upwards.
2) Connect the USB cable to the left
speaker and a powered USB port
on your computer.
3) Connect the computer audio cable
to the audio out jack on your
computer and to the computer jack
(marked "to computer") on the iP71
to listen to computer audio.
3rd Gen nano
iPhone
Insert 12
iPhone 3rd Gen nano
Insert iPhone/iPod into dock
with proper insert
(iPhone/iPod must not be in
a skin or case). iPhone/iPod
will charge while docked.
Press the Power button on
the iP71 then press
play/pause button on your
iPhone/iPod to play the
iPhone/iPod.
iPod Touch
insert 13 Insert 14
iPod Touch
5:stand
1
3:inserts
Select the dock insert for your
iPhone or iPod model from the
table below and place insert in
dock. Never dock an iPhone or
iPod without an insert in place.
3G iPhone
Insert 15
3G iPhone
The iP71 has pull out
"feet" (stands) on the
back of each speaker
for added stability. Grip
the stands and pull
outward for use. Press
back under speaker
body when
needed.
not