Quick Start - iHome iBN48 User Manual

Quick Start

1: stand
OPEN
Stand
Gently pull backwards on the indent of the stand located on
the rear of the unit and pull it into place for support mode. To
close the stand, simply press back into place.
3: pairing devices via NFC
If a compatible device, such as a phone, supports Near
Field Communication (NFC), activate its NFC feature,
and bring the NFC antenna of the device within close
contact of the NFC antenna on the top panel of the
iBN48 as shown above. The iBN48 powers on and the
LED will flash red/blue as the speaker connects to the
mobile device automatically. Once paired, the LED turns
solid blue and plays a confirmation tone.
2: power
CLOSE
Attach AC adaptor cable to DC jack on bottom of the unit
and plug the other end into a wall socket. A row of 4 blue
LED indicators will light up indicating the unit has power and
has begun charging the internal battery.
4: pairing devices via Bluetooth
Press the Power Button on the iBN48. Press and hold
the pairing button for 2 seconds. While in pairing
mode, the LED indicator will flash red/blue. Activate
the Bluetooth option on your mobile phone. The iBN48
device will show as "iHome iBN48". If prompted for a
passcode, enter '1234' on your device. Once
connected, you will hear a confirmation tone and the
LED will turn solid blue.
2
RESET
TEST
9V 2A
9V 2A