Related Manuals for iHome iHome iBT30
Summary of Contents for iHome iHome iBT30
- Page 1 iBT30 Bluetooth Wireless Portable Rechargeable Stereo Speaker System instruction manual...
- Page 2 Introduction Thank you for purchasing the iHome iBT30. This product is designed to wirelessly stream music from all Bluetooth smartphones and tablets. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference.
-
Page 3: Table Of Contents
iBT30 Table of Contents Included/ Meet Your iBT30..................... 1-2 Setting Up the Unit: Charging/Turning the Unit ON and OFF...........3 Using Bluetooth: Pairing Your Device ..................4 Playing Audio Via Bluetooth....................5 Stereo Bluetooth Pairing for Linking 2 iBT30 Units ..............6 Playing Audio Via Aux line-in ....................7 Charging Via USB Port ......................8 FCC Information.......................9 Internal Rechargeable Lithium-ion Battery................10... - Page 4 iBT30 Included • iBT30 Speaker • Charging base • Stereo 3.5 mm audio cable • 100V-240V universal AC adaptor audio iBT30 Speaker power adaptor cable charging base...
-
Page 5: Included/ Meet Your Ibt30
iBT30 Meet Your iBT30 Volume Down Button Power Button Volume Up Button Front Status Indicator (located behind speaker grille) Back Pairing Button Master power switch Back Bluetooth Indicator USB Charging Port Aux-in Jack... -
Page 6: Setting Up The Unit: Charging/Turning The Unit On And Off
Setting Up the Unit: Charging iBT30 Using the 1. Connect the included AC adaptor to the DC jack located on the back of the charging base and connect the other end to a working wall outlet. Place unit on charging base. For first time use, leave unit on charging base until fully charged (about 10 hours). -
Page 7: Using Bluetooth: Pairing Your Device
4. If no linked device is found, the unit will enter pairing mode, and the lights will flash blue while the unit attempts to pair. “iHome iBT30” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message appears on your device, tap on “iHome iBT30” to begin/complete pairing. -
Page 8: Playing Audio Via Bluetooth
iBT30 Using the Pairing with a Different Device When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (approx. 30 feet). So, to pair with a different device you must turn off the Bluetooth capability of the already paired device. -
Page 9: Stereo Bluetooth Pairing For Linking 2 Ibt30 Units
iBT30 Using the Stereo Bluetooth Pairing for Linking 2 iBT30 Units If you have 2 iBT30 units, you can activate stereo pairing between them. 1. Slide the Power Off/On Switch to the on position (right) on each unit to turn the unit ON. 2. -
Page 10: Playing Audio Via Aux Line-In
iBT30 Using the Playing Audio via Aux In 1. Connect one end of the included 3.5mm stereo audio cable to the Aux-in jack on the back of the unit and connect the other end to the headphone or line-out jack on your audio device. 2. -
Page 11: Charging Devices Via Usb Port
iBT30 Using the Charging Devices via USB Port 1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device. 2. -
Page 12: Fcc Information
iBT30 FCC Information FCC ID: EMOIBT30 IC: 986B-IBT30 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-210 of the IC Rules;... -
Page 13: Internal Rechargeable Lithium-Ion Battery
iBT30 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. -
Page 14: Troubleshooting
Troubleshooting Unit doesn’t respond (no power) • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBT30. • Make sure the Power is ON, indicated by a solid blue light on the front of the unit. Unit doesn’t respond (frozen or locked up) •... -
Page 15: Consumer Product Safety Guide
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. - Page 16 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time.
-
Page 17: Warranty
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.