Ip48 Quick Start - iHome IP48 User Manual

iP48 Quick Start

1:Unzip unit
Unzip the iP48 to open the unit. Press the Display Button
to release the pop-up display from travel mode (flat) to upright
position.
Use this insert
For this
iPhone/iPod
www.ihomeaudio.com or call iHome toll free at 800-288-2792 to purchase one
3:inserts
Select the dock insert for your iPod/iPhone model from the
table above and place insert in dock.
Never dock an iPod/iPhone without an insert in place.
iPhone 3G
insert 15
iPhone 3G/3GS
NOTE: If you do not have an insert for your iPod, please visit
2:AC adaptor
RESET
RESET
TEST T
ST E
Connect the AC adaptor to the DC jack on the left side of the
iP48 and plug the other end into a working wall socket to
charge and play iPod/iPhone and to charge internal battery.
iPod touch 2G
insert 16
iPod touch 2G
4:iPod/iPhone
Gently place iPod/iPhone on the connector plug in dock.
Press Power Button to ON. Unit and iPod/iPhone will
turn on. Adjust volume by pressing the
1
iPod nano 5G
insert 18
iPod nano 5G
+
or
–
Button.