Quick Start - iHome SMARTDESIGN iC16 series Instruction Manual

Quick Start

1:power
RESET R
SET E
TEST T
ST E
Attach the AC adaptor cable to
the AC adaptor jack on the back
of the iC16 and plug the other end
into a working wall socket. For
portable operation,
battery compartment door on the
bottom of the unit and insert 4
AA batteries (see diagram on
page 4).
3:time
remove
To set time
• Press the DST On/Off Button on the back of
the unit as needed to add or subtract an hour
for daylight saving time or standard time.
• Press & hold the Clock Adj. Button on the top
of the unit until the hour display flashes.
• Press the + or - buttons to set the hour, then
press the Clock Adj. button
• Press the + or - buttons to set the minutes
1
then press the Clock Adj. Button again to
confirm time setting. 2 beeps will sound.
2
2:Android
Connect one end of the included
stereo audio cable with 3.5 mm plugs
to the headphone jack on your
Android device and the other end to
the aux in jack on the back of the unit.
Press the Power Button on the iC16.
Put your Android device in play
mode.
Press the + or – Button on the iC16 to
adjust the system volume.