Quick Start Controls and Indicators Getting Started with your iP48 Using the iP48 A Consumer Guide to Product Safety Trouble Shooting Warranty Information are registered trademarks of SRS Labs, Inc. TruBass and WOW technologies are incorporated under license from SRS Labs, Inc.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules.
RESET TEST T Connect the AC adaptor to the DC jack on the left side of the iP48 and plug the other end into a working wall socket to charge and play iPod/iPhone and to charge internal battery. iPhone 3G...
When music becomes weak or distorted, charge battery The iP48 comes with a rechargeable lithium ion battery for portable use when the unit is not connected to AC power. The first time you connect the iP48 to AC power, keep it connected for several hours to fully charge the battery.
Page 7
4. Do not place in trash. Dispose of battery according to local battery recycling laws Installing/Replacing the Backup Battery The iP48 uses a backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. The backup battery is included. If the Backup Battery Low Icon (located on the upper left of the display) is flashing, it is time to replace the backup battery.
Page 8
Using Time Sync to Set Clock from iPhone/iPod The iP48 allows you to sync its clock with the time setting on the iP48 to the time from your iPhone or recent model iPod Touch, iPod Nano and iPod Classic (older iPod models such as iPod mini do not support this feature).
Snooze can be pressed several times during the alarm time cycle. Sure Alarm The iP48 has a sure alarm feature. If the backup battery is installed, the buzzer alarm will still sound in the event of a power failure. Charging your iPhone/iPod Note: Please make sure you are using the correct insert for your iPhone or iPod (see Install iPod Insert) and that it is properly docked into the iP48.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Symptom Possible Problem Unit doesn’t respond AC adaptor isn’t plugged into a wall outlet (no power) or the connector is not plugged into the power supply jack on the back of the dock Wall outlet is not functioning or switched off Internal battery is weak or dead iPod/iPhone does not Using no or wrong iPod/iPhone insert...
Page 12
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 year from the date of original purchase.
Need help?
Do you have a question about the IP48 and is the answer not in the manual?
Questions and answers