Bluetooth bedside/home office stereo speaker system with far field voice (16 pages)
Summary of Contents for iHome iBTW39
Page 1
Model: iBTW39 Bluetooth Bedside/Home O Speaker System with Qi Wireless Charging instruction manual Questions? Contact Customer Service at 1-800-288-2792...
Page 2
Introduction Thank you for purchasing the iHome iBTW39. This product is designed to provide high quality wireless sound for your Bluetooth audio device. It will also wirelessly charge compatible devices. For more features, download the iHome Enhance app to extend the possibilities of this product.
Page 3
Meet Your iBTW39 Smart Button Play/Pause/Voice Control Button +/– Settings/Volume Buttons Power Button Snooze/Display Dimmer Cap Touch Button Wireless Charging Pad (Beneath Fabric) (under fabric) Microphone Device Charging Rest Back Wireless Charging Indicator (below charging rest) Bottom Speaker Battery Door...
The Display Time Display Alarm 1 Active Indicator PM Time Indicator Low Backup Battery Indicator Bluetooth (Red LED) Pairing Alarm 2 Active Indicator Indicator (Blue LED) Powering Up the Unit Connect the AC adaptor Connect the included AC adapter to the DC jack...
Using the Step One Establish a Bluetooth Connection Install the iHome Enhance app 1. Download iHome Enhance app from your app 1. Press the Power Button to turn on speaker and begin Pairing. store. 2. Select iHome iBTW39 on your device’s 2.
Manually Setting Clock + Alarms Using the Setting the Clock Time Set Button located on the back of the unit for 2 seconds until the Press and hold the clock display flashes and a beep sounds. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time.
Using the Setting and Using the Alarm (Cont’d) 3. Press the Alarm Button to confirm the alarm time setting. The wake-to schedule will flash. Press the – or + Buttons to set the desired alarm schedule: 7 Days (every day), 5 Days (week days only) or 2 Days (weekends only).
Page 8
Using the Snooze/Display Dimmer Cap Touch Button To program Snooze, touch and hold the Snooze/Display Dimmer Cap Touch Button (ZZZ) during normal operation (when no alarm is sounding). 2. Press the – or + Buttons to select the desired snooze time (between 01 and 29 minutes).
If no device is successfully paired within 3 minutes the iBTW39 will default to previous mode. Once the iBTW39 is paired to a device, it will attempt to autolink when the device is within range (about 33 feet). To reset Bluetooth, press and hold the Bluetooth Button for 10 seconds.
Using the Playing Audio Via Bluetooth 1. “bt” and the Bluetooth indicator appear on the display when the unit is on and Button on the unit to play or pause audio from your device is connected. Press the your linked Bluetooth device.
Page 11
Using the Using Qi Wireless Charging This unit will wirelessly charge Qi compatible wireless charging phones. PMA wireless charging system is not supported. CAUTION: Remove metal protective or magnetic case from phone before charging. When charging phone, do not place magnetic-striped or other metal objects on the charger.
Using the Charging Devices via USB Port Connect the standard size end of a USB cable (not NOTE: Unit must be included) to the USB Port on back of the unit and connect plugged into working the other end to the charging port on your device.
Troubleshooting • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBTW39. • Make sure the Power is ON. • Make sure unit is not connected to an outlet controlled by a switch.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free...
FCC Radiation Exposure Statement FCC ID: EMOIBTW39 IC: 986B-IBTW39 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the iBTW39 and is the answer not in the manual?
Questions and answers