TechniSat DIGITRADIO 570 CD IR Instruction Manual page 65

> To switch the function off again, press the Repeat track button as often as
required until the icon no longer appears.
> Press the Shuffle button (5) to play the tracks in a random sequence.
14.7 Programming playback
You can programme up to 20 tracks on a CD in any sequence.
> Stop any playback in progress by pressing the STOP button
> Press the PRESET button on the remote control, or 5+ on the device to
access the programming mode.
The display now shows [P01] for the first track to be programmed.
> Using the
accept the storing.
> Then [PO2] is displayed for the second track which you can also add as
described above.
> When programming is complete, press the Playback/Pause button
To delete programming, either press Stop
the Eject button.
15 Audio input
You can play sound on an external device via the DIGITRADIO 570 CD IR speaker.
> Connect the external device to the AUX-IN port (16, 3.5 mm stereo jack) on
the back
> Use the MODE button to select the audio input. [Aux-In] appears on the
display.
The playback is controlled on the external device. Do not set the volume too
low to prevent interference.
16 Other functions
16.1 Sleep function
> Press the MENU button and then select [Main Menu > Sleep].
> You can use the  or  buttons to set the period for Sleep off in 15, 30, 45
or 60 minute intervals, after which the device switches to standby while in
any operating mode.
/ buttons, select a track and press the OK button to
.
2x or open the CD tray using
.
DE
EN
FR
NL
65