TechniSat DIGITRADIO 570 CD IR Instruction Manual page 53

6.4.4 Adjusting the volume
> Use the VOL +/- (10, 23) buttons on the remote control or VOLUME +/- (10)
on the device to set the volume. The set volume is shown on the display.
6.4.5 Activating the mute function
> You can switch off the volume at the touch of a button using the MUTE
button (13).
This mode is indicated in the status bar by a corresponding icon.
> Pressing the MUTE button again switches the volume back on.
6.4.6 Accessing displays
> By repeatedly pressing the INFO (6) button during the playback of a source,
certain extra information can be viewed and scrolled through.
6.4.7 Displays
Current source
Station name,
track, artist,
additional info,
menu, lists
The displays shown can vary depending on the selected function/source. Take
note of the instructions on the display.
7 Menu navigation
Menu navigation primarily takes place using the MENU,/ and OK buttons on the
remote control, or the INFO/MENU buttons and the TUNING/OK knob on the device.
The menu is divided into the respective submenu for the currently selected source
and the main menu. Press the MENU button (on the remote control) or hold down
the INFO/MENU button (on the device) until the submenu for the current source
opens up.
You can navigate using the / buttons on the remote control or by turning the
TUNING/OK knob. Press the OK button on the remote control or the TUNING/OK
knob on the device to make a selection.
* highlights the current selection.
> Press the BACK button to move back a step.
Closing the menu: Press the BACK or MENU button several times or wait for
approx. 15 seconds.
Time
Status bar
53
DE
EN
FR
NL