Check Point Smart-1 Series Installing And Removing
Hide thumbs
Also See for Smart-1 Series:
- Manual (16 pages) ,
- Installing and removing (10 pages) ,
- Quick start manual (6 pages)
Advertisement
Smart-1 Installing and Removing
AC Power Supply Units
70749 5
Protecte d
2018
This document is for appliance models Smart-1 525, Smart-1 5050, and
Smart-1 5150.
Safety Instructions
•
Lift the appliance with assistance. To avoid injury, do not attempt to lift the
appliance by yourself.
•
Opening or removing the appliance cover, while the appliance is powered on
may expose you to a risk of electric shock.
•
Do not operate the appliance without the cover for more than five minutes.
Operating the appliance without the cover can result in component damage.
•
Many repairs may only be done by a certified service technician. Only
perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the technical support.
•
We recommend that you always use an antistatic mat and antistatic strap on
your wrist, while working on components inside the appliance.
•
To ensure proper operation and cooling, all bays in the appliance and
cooling fans must be always populated with a component or a blank.
For more information, see the
Regulatory Information
carton.
Classification [Protected]
© 2018 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to:
Enterprise Products Safety, Environmental, and
booklet supplied in the original appliance shipping
www.checkpoint.com/3rd_party_copyright.html
P/N:707495
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Check Point Smart-1 Series
Summary of Contents for Check Point Smart-1 Series
- Page 1 Classification [Protected] P/N:707495 © 2018 Check Point Software Technologies Ltd. All rights reserved. For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html. For a list of our Third Party Copyright notices, please refer to: www.checkpoint.com/3rd_party_copyright.html...
- Page 2 Important - We recommend that only experienced personnel install or remove hardware components. Installing or removing components incorrectly can permanently damage the Security Management Appliance. Important - Make sure that you are electromagnetically grounded when working with hardware components of the appliance. ESD (electrostatic discharge) can damage the appliance.
- Page 3 • When two PSUs are installed, and the appliance is powered on, you must remove and replace only one PSU at a time. • When two PSUs are installed, they must be the same type and have the same maximum output power. •...
- Page 4 Indicator lights for AC PSU Each AC PSU has a translucent handle. This handle shows different colors to indicate if AC power is received, or a PSU fault occurred. Indicator Description handle light A valid AC power source is connected to the AC PSU. The AC PSU is operational.
- Page 5 Indicator Description handle light Indicates a problem with the AC PSU. Flashing amber AC power is not connected to the AC PSU. Removing an AC PSU Important Note - If you do not install the replacement PSU at this time, leave the failed PSU in place to ensure proper appliance cooling.
- Page 6 Important - The appliance needs one working PSU for the normal operation. When two PSUs are installed, and the appliance is powered on, remove and replace only one PSU at a time. Important - When only one working PSU is installed, it must be installed in the first PSU bay - see the markings on the appliance cover.
- Page 7 6. Make a loop and secure the power cable to the PSU using the retention strap. 7. Plug the power cable into a power outlet.
Need help?
Do you have a question about the Smart-1 Series and is the answer not in the manual?
Questions and answers