Advertisement
Replacing Check Point TE
Appliances Power Supply Unit
70634 7
Protecte d
2015
This document describes how to replace the power supply units for the TE250X
Appliance , TE1000X Appliance, and TE2000X Appliance. They have a redundant
power supply unit. If necessary, you can replace a power supply or placeholder
unit.
Important - Make certain that you are electromagnetically
grounded when performing the following procedures. Static
electricity can damage the appliance.
TE250X Appliance
Item Description
1
Power supply unit
2
LED
3
Release lever
4
Power switch
Classification [Protected]
© 2015 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to:
Item
Description
5
Extraction handle
6
Power cord socket
7
Red alarm button
www.checkpoint.com/3rd_party_copyright.html
P/N:706347
Advertisement
Table of Contents
Related Manuals for Check Point TE250X
Summary of Contents for Check Point TE250X
- Page 1 Protecte d 2015 This document describes how to replace the power supply units for the TE250X Appliance , TE1000X Appliance, and TE2000X Appliance. They have a redundant power supply unit. If necessary, you can replace a power supply or placeholder unit.
- Page 2 Note - The TE250X Appliance figure shows the appliance populated with two power supply units. The default configuration contains only one power supply unit. TE1000X Appliance and TE2000X Appliance Item Description Item Description Power switch Power cord socket Power supply unit...
- Page 3 Removing Power Supplies To remove a power supply unit: 1. If the alarm sounds, press the red alarm button to the right of the power supply unit. The alarm stops. 2. Remove the power cord from the power supply unit. 3.
Need help?
Do you have a question about the TE250X and is the answer not in the manual?
Questions and answers