Check Point Smart-1 525 Manual

Smart-1 Installing and Removing
Transceivers
70754 8
Protecte d
2018
This document is for appliance models Smart-1 525, Smart-1 5050, and
Smart-1 5150.
Important
• Read the Health and Safety Information in the Getting Started guide for
your appliance. For a list of all Appliances Getting Started guides, see
sk96246 http://supportcontent.checkpoint.com/solutions?id=sk96246.
• To protect the appliance and transceivers from electrostatic discharge,
make sure that you are grounded.
• We recommend that you use an ESD grounding wrist strap. Connect the
grounding plug on the wrist strap to the chassis grounding point.
Line cards with fiber optic ports use transceivers.
Classification [Protected]
© 2018 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to: www.checkpoint.com/3rd_party_copyright.html
P/N:707548