Basic Settings - Siemens CP565AGS0B User Manual And Installation Instructions

en Cleaning and servicing
Display
1 Factory setting (may vary according to model)
15.2 Changing the basic settings
Requirement: The appliance is switched off.
Press and hold for a few seconds.
1.
a The first basic setting is shown on the display.
Use the rotary selector to change the basic setting.
2.
Press ⁠ .
3.
a The next basic setting is shown on the display.
Use to select all of the required basic settings
4.
and change the values.
16 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
16.1 Tips on caring for your appliance
Follow the tips on appliance care to make sure your
appliance functions properly at all times.
Measure
Always keep the appli-
ance clean and remove
dirt immediately. Always
clean the cooking com-
partment after use.
Remove limescale,
grease, starch and albu-
min (e.g. egg white)
stains immediately.
Use the glass tray for
baking very moist cakes.
26
Basic setting
Button tone
Display brightness
Time indicator
Interior lighting
Water hardness
Factory setting
Demo mode
Advantage
Prevents dirt from accu-
mulating and burning on.
Prevents corrosion.
Keeps the cooking com-
partment cleaner.
Selection
= off
1
= on
= low
1
= medium
= high
= off
1
= on
= off
1
= on
= softened
= soft
= moderate
= hard
1
= very hard
1
= off
= on
1
= off
= on
To save the changes, press and hold
5.
seconds.
Note: The changes to the basic settings will be re-
tained even after a power cut.
15.3 Discarding changes to the basic
settings
Turn the function selector.
▶
a All changes are discarded and not saved.
Measure
Use suitable cookware for
roasting, e.g. a roasting
dish.
Use hot air if possible.
16.2 Cleaning products
Only use suitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
Description
Switch the button tones on
or off.
Set the brightness of the
display.
Show the clock time in the
display.
Switch the interior lighting
on or off.
Set the water hardness
→ Page 12.
Reset the changed settings
to the factory settings.
Switch demo mode on or
off.
Note: Demo mode is only
visible in the first 5 minutes
after connecting the appli-
ance to the mains.
for a few
Advantage
Keeps the cooking com-
partment cleaner.
Less soiling