Table of Contents
Advertisement
Changing the basic settings
Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting
Brightness of the display lighting
c0
c1
Cooking time signal
The duration of the audible signal once
a cooking time has elapsed.
c2
Clock display
The clock is shown in the display if the
oven is switched off.
c3
Continuation of operation
Way in which operation continues
once the oven door has been opened
and closed again.
Continue when door shut:
off
*Continue operation with
Waiting time until a setting is applied -
c4
c5
Operating voltage
c6
Resetting factory settings
Revert all changes to the basic set-
tings.
* Factory setting
The oven must be switched off.
Press and hold the
button for approx. 6 seconds.
0
1.
The current basic setting for signal duration is shown on the
display, e.g.
for selection 2.
™‚ƒ
Use the
or
button to change the basic setting.
@
A
2.
Automatic switch-off
If you do not change the settings on your appliance for several
hours, automatic switch-off is activated. The oven stops heating.
The point at which this occurs depends on the temperature or
grill setting that has been set.
Automatic switch-off is activated
A signal sounds. F8 appears in the display. The oven stops
heating.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Selection 0
-
-
only when in opera-
tion*
off*
/
J
Ù
220-230 V*
no*
Selection 1
Selection 2
night
medium*
approx. 10 seconds approx. 2 minutes*
always*
-
automatic
-
approx. 2 seconds
approx. 5 seconds* approx. 10 seconds
230-240 V
-
yes
-
Confirm by pressing the
3.
The next basic setting appears in the display. You can scroll
through all levels using the
using the
@
or
A
button.
To finish, press and hold the
4.
6 seconds.
All basic settings are applied.
You may change the basic settings at any time.
Turn the function selector to the off position. The oven switches
off.
Overriding automatic switch-off
So that automatic switch-off is not activated when it is not
wanted, you can set a time period. The oven will heat until this
period has expired.
Always allow the appliance to cool down. Keep children at a
safe distance.
Notes
Slight differences in colour on the front of the appliance are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
Selection 3
day
approx. 5 minutes
-
-
-
-
0
button.
button and change the setting
0
button for approx.
0
13
Advertisement
Table of Contents
