Siemens CP565AGS0B User Manual And Installation Instructions page 24

en Time-setting options
12.3 Applying settings for dishes
Set the function selector to
1.
a The display shows the first dish number and a de-
fault value for the weight.
Use the rotary selector to set the required weight.
2.
Press ⁠ .
3.
a The weight setting is highlighted on the display.
Turn the rotary selector to set the weight.
4.
Before starting, you can use
between the dish and the weight.
a The appliance automatically sets the right cooking
time.
5. Press ⁠ .
Once you have started the programme, you can no
longer change the dish or the weight. You can use
to display the set weight.
a The appliance starts.
lights up.
a
a You will see the cooking time counting down.
a When the time has elapsed, a signal sounds.
Turn the function selector to the zero setting.
6.
Note: Before starting, you can use
between programmes and weight.
Once you have started the programme, you can no
longer change the programme number or the weight.
You can check the set weight using
13 Time-setting options
Your appliance features time-setting options that you
can use to set the cooking time and the timer.
13.1 Overview of the time-setting options
Your appliance has various time-setting options. You
can use to call up the menu and switch between the
individual functions. The symbols for the available func-
tions light up on the display and the function that you
just selected is highlighted.
Time-setting Use
option
Timer You can set the timer to run inde-
pendently of the appliance during op-
eration. It does not affect the appli-
ance. A signal sounds once a timer
duration has elapsed.
Cooking time Once the set cooking time has
elapsed, the appliance will automat-
ically stop heating. You can only call
up the cooking time using
setting a type of heating. An audible
signal sounds once the time has
elapsed.
Clock When no other function is running in
the foreground, the appliance shows
you the time of day on the display.
Note: You can cancel the audible signal early by press-
ing . You can change how long the audible signal
sounds for in the basic settings → Page 25.
24
⁠ .
and to switch
and to switch
⁠ .
after
12.4 Changing the dish
Press for 4 seconds or open the appliance
1.
door.
a The dish is reset
Select a new dish.
2.
12.5 Pausing operation
You can pause operation at any time.
Press or open the appliance door.
1.
a Operation is paused.
a flashes.
To continue operation, close the appliance door and
2.
press ⁠ .
a Operation continues.
lights up.
a
12.6 Stopping operation
You can stop operation at any time.
Turn the function selector to the off position.
▶
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
13.2 Checking the time-setting options
Requirement: If several time-setting options are set,
the corresponding symbols light up on the display. You
can see the cooking time counting down. During opera-
tion, the timer and cooking time are available. In
standby, the timer and the time are available.
Press until , or
▶
a The respective value is shown on the display.
13.3 Setting the timer
Press ⁠ .
1.
a and the time symbols light up on the display.
Use the rotary selector to set the timer duration.
2.
a After a few seconds, the time setting is adopted.
a The timer starts.
lights up on the display and the timer counts
a
down. The other time symbols go out.
a An audible signal sounds once the timer duration
has elapsed. ⁠ ⁠ :
You can use any field to switch off the timer.
3.
13.4 Changing the timer
Use the rotary selector to change the timer duration.
▶
a After a few seconds, the appliance displays the set
timer duration.
13.5 Cancelling the timer
Use the rotary selector to set the timer duration to
▶
⁠ ⁠ : ⁠ ⁠ .
a The timer is switched off.
is highlighted.
is shown on the display.