ResMed Mirage Micro User Manual page 6

Disassembling the Mask
1
Detach the air tubing.
4
side tabs
Remove the vent cover
by lifting the side tabs.
7
Remove the forehead
support pads from the
forehead support.
2
Unclip the headgear clips
and unthread the upper
headgear straps. It is not
necessary to remove the
headgear clips from the
headgear.
5
Remove the swivel from
the elbow.
8
Remove the cushion
from the mask frame.
4
3
Remove the elbow
assembly from the mask
frame.
6
(b)
Note the position on the
dial for the next time you
use the mask. Unscrew
and remove the dial (a)
then pull the forehead
support (b) out of the
mask frame.
9
Remove the ports cap
from the mask frame.
(a)