Switching Off; Rotating Handle; Storing The Machine - Stihl HSE 61 Instruction Manual

English
► Push down the trigger switch lockout (2),
depress the trigger switch (3) and hold them in
that position.
The machine is designed for two-hand operation,
i.e. it will run only when the operator's hands are
on the auxiliary switch (4) and trigger switch (3).
6

Switching Off

► Release the trigger switch (1) and the switch
lever (2).
Extended reach position:
3
► Release the trigger switch (1) and auxiliary
switch (3).
HSE 61, 71
The blades are covered by the blade guard in
the idle position.
26
2
1
1
HSE 81
The blades are partly covered by the blade guard
in the idle position.
6.1 Other hints
► During longer work breaks – disconnect the
plug from the power supply.
► When the machine is not in use, shut it off so
that it does not endanger others.
► Secure it against unauthorized use.
7

Rotating Handle

2
► Move the two buttons (1) in the direction of the
arrows and hold them there.
► Rotate the handle (2) to the required position.
► Release the two buttons and engage the han‐
dle in position.
The handle (2) cannot be rotated while the trig‐
ger switch (3) is depressed.
8

Storing the Machine

For periods of about 30 days or longer
► Clean cutting blades, check condition and
spray with STIHL resin solvent
► Attach blade scabbard
► Thoroughly clean the machine, especially the
ventilation slots
► Store the machine in a dry and secure loca‐
tion; the blade scabbard can be mounted to
the wall for this purpose. Keep out of the reach
of children and other unauthorized persons
6 Switching Off
1
3
0458-279-9821-E