Table of Contents
Advertisement
English
The cutting attachment should rest lightly on the
ground.
► Switch off the brushcutter
► Connect the carrying ring (2) to the carabi‐
ner (1).
► Wait for brushcutter to stop swinging.
► Check the position of cutting attachment. If it
needs adjustment:
3
► Loosen the screw (3).
► Move the carrying ring (2) up or down the
shaft until a correct balanced position is
reached.
► Tighten the screw (3) securely.
14
2
1
2
10 Removing and Fitting the Battery
10 Removing and Fitting the
Battery
10.1
Inserting the Battery
► Insert the battery (1) up to the limit stop into
the battery compartment (2).
The battery (1) engages with a click and is
now locked.
10.2
Removing the Battery
► Set the brushcutter on a level surface.
► Press both locking levers (1).
The battery (2) is released and can be
removed.
11 Switching the Trimmer
On/Off
11.1
Switching on the brushcutter
4
3
► Hold the brushcutter firmly with your right hand
on the control handle so that your thumb
wraps around the grip (2) of the control han‐
dle.
1
2
2
1
1
2
0458-028-0101-A
Advertisement
Table of Contents
