Manually Correcting The Reference Position - Citizen Eco-Drive Manual

10. Manually Correcting the Reference Position

Correct the reference position if the watch does not indicate 12:00:00 for
the time, the 1st for the date and SUN for the day.
<Correcting the Reference Positions of the Hour Hand,
Minute Hand, Second Hand, Date and Day>
Step 1): Press button (B) for about 5 seconds or more, release it once the
second hand has started to move rapidly, and then wait after pulling the
crown out to Position 2 while the hand is moving.
Step 2): Turn the crown to align the date at
"1".
Continuously turning the crown (by 2 clicks
A
or more) to the right causes the date to
change continuously, while continuously
turning to the left causes it to return.
Turn the crown to the left or right to stop
L
the date from changing.
88
RX
Button (B)
SUN 1
Button (A)
When a "1" appears in the center of the date window on the watch dial, turn the
B
crown to the left or right to stop the date from changing.
Each time button (A) is pressed once, the date, day or second hand to be
L
corrected moves indicating that the watch is in the correction mode.
Step 3): Press button (A) once and turn the crown to set the day to "SUN".
Turning the crown continuously to the right (by 2 clicks or more) causes the day to
A
change, while turning continuously to the left causes it to return.
Step 4): Press button (A) once and turn the crown to set the hands to "00:00:00".
Turning the crown to the right (by 1 click) causes the second hand to advance
A
rapidly by 1 minute, while turning it to the left causes the second hand to move
back by 1 minute.
Continuously turning the crown (by 2 clicks or more) causes the second hand to
B
rotate rapidly, and the minute hand and hour hand moves continuously in
coordination with the second hand.
Step 5): After setting the reference position, return the crown to the normal
position and press button (B) once to rapidly return each hand, date and
day to the current time and date.
Although this completes the procedure for setting the reference position, perform
L
free reception before using to set the watch to the correct time.
89