Time Difference Correction Procedure - Citizen Eco-Drive Manual

V Reading the "No. of Elapsed Years" indicated by the
Second Hand
Leap year:
Starting point of each month zone indicated by the Second Hand
1st year after most recent leap year:
1st graduation of each month zone indicated by the Second Hand
MON 7
2nd year after most recent leap year:
2nd graduation of each month zone indicated by the Second Hand
3rd year after most recent leap year:
3rd graduation of each month zone indicated by the Second Hand
Step 5): Check what year the current year is after the most recent leap year and
turn the crown to the right to align the second hand at the position
corresponding to the month and no. of elapsed years. Turning the
crown to the left (by 1 click) causes the second hand to move in
reverse.
Step 6): Return the crown to the normal position.
Each time the crown is pulled out to Position 1 and button (A) is pressed once, the
L
second hand moves to the date and day to be corrected to indicate that the watch has
entered the correction mode.
84

7. Time difference correction procedure

This function lets you set a time difference in 1 hour units for the local time when
L
traveling to a region or country in a different time zone by operating the second hand.
±0
Step 1): When button (B) is pressed once, the
-5 +5
RX +10
-10
Button (B)
MON 7
Step 2): The time difference can be advanced by 1
+27
-27
Example: When setting the time difference
for Hong Kong based on Japan time:
L
Since there is a time difference of 1 hour
between Hong Kong and Japan, the second
hand is set to the 59 seconds position.
Step 3): After setting the time difference, the second hand returns to 1-second
interval movement after indicating rapidly the time difference set time
when button (B) is pressed once or when none of the buttons have been
pressed for 60 seconds.
second hand stops at the 12:00 position,
and the second hand 12:00 position
indicates a time difference of ±0 hours.
* The second hand stops at the position
corresponding to the time difference when a time
difference has been set.
hour with one step of the second hand by
turning the crown to the right without pulling
it out. The time difference can be turned
back by 1 hour with one step of the second
hand by turning the crown to the left.
The second hand indicates Japan standard time when
at the 12:00 position. The time difference can be set
to ±27 hours based on Japan standard time.
85