Troubleshooting - Citizen Eco-Drive Manual

Troubleshooting

<Radio Wave Reception Function>
Try checking the following when you think a problem has occurred.
Problem Check Items
Does the second hand
L
Watch does not
move to "RX: Reception
begin reception
standby"?
Time does not
match telephone Has the reference
L
time service even position been set
though radio waves correctly?
can be received
102
Corrective Actions
Continuously depress button
L
(A) and release when the
second hand points to the RX
position.
Check the reference position.
L
If the reference position is not
correct, refer to "10. Manually
Correcting the Reference
Position" and reset the
reference position.
Problem Check Items
Are there objects that
L
block radio waves or
generate noise nearby?
Are radio waves
L
attempted to be received
away from a window?
Unable to receive
radio waves (even
within a receivable
area)
Has the watch been
L
moved while the second
hand is indicating RX or
a reception level of H, M
or L during reception?
Corrective Actions
Try receiving radio waves
L
while facing the 9:00 position
of the watch towards a
transmitter station while
avoiding objects that block
radio waves or generate noise.
Try changing the direction,
location and angle of the watch
several times to find the
location near a window at
which radio waves are received
easily. Refer to "3. Locations
where Reception may be
Difficult" in the section on
Radio Wave Reception.
Wait until reception is
L
completed (until it returns to
normal hand movement) before
moving the watch.
103