Power Save Function - Citizen Eco-Drive Manual

A. Power Save Function
When the watch dial is continuously not exposed to light for 90 days or more, each hand
stops at the 12:00 position and the watch enters the Power Save mode (to reduce power
consumption).
[The following functions continue to
operate in the power save mode.]
Regular automatic reception is still performed.
L
When radio waves are unable to be received
by regular automatic reception at 2:00 AM
every day, radio waves are attempted to be
received automatically again at 4:00 AM.
Time is continuously kept internally by the
L
watch.
The calendar (date, day) is changed
L
automatically.
94
RX
SUN 1
Stopped at 12:00 position
<Canceling Power Save>
The power save function is canceled automatically when the watch dial is exposed to
light.
When the power save function is canceled, each hand rapidly returns to the current
L
time and the second hand begins one-second interval movement.
Two-second interval movement begins if the watch is insufficiently charged. When
L
this happens, sufficiently charge the watch so that it returns to one-second interval
movement.
[Note]
· Although regular automatic reception is performed while the watch is in the Power
Save mode, radio waves may not be able to be received depending on the storage
environment. Check the reception result by pressing button (A) after the Power Save
function has been canceled. If the reception result is "NO", perform free reception
before using.
· Power save cannot be canceled by operating the crown or buttons. It can only be
canceled by exposing the watch to light.
95