Citizen Eco-Drive Manual page 5

Hide thumbs Also See for Eco-Drive:
Table of Contents

Advertisement

W W Please remember the following about
receiving radio wavesW W
Regular Automatic Reception
(Automatic reception of radio waves)
Regular automatic reception does not require
L
any buttons to be pressed.
Radio waves are received at 2:00 AM each day, or
radio waves are automatically attempted to
received again at 4:00 AM when they are unable to
be received at 2:00 AM, to set the time and date.
<Reception Procedure>
Take the watch off of your wrist, face the 9:00 position (location of the reception
L
antenna) towards the radio wave transmitter station and place the watch in a stable
location that allows radio waves to be received easily such as near a window.
<Confirmation of Reception>
You can check the reception result anytime after the regular automatic reception time.
Press button (A) once.
L
· If the second hand points to "H, M or L", this indicates that radio waves have been received.
· If the second hand points to "NO", this indicates that radio waves were unable to be
received. If the reception result is "NO", refer to the next page for the procedure for
performing free reception.
64
RX
MON
7
Refer to the section entitled "General
Reference for Receiving Areas" on p.66
for information the direction of the
transmitter station.
Free Reception
(Manual reception of radio waves)
This function allows radio waves to be received at any time.
L
Perform free reception when the reception environment has changed and radio waves are
unable to be received by Regular Automatic Reception.
<Reception Procedure>
L Take the watch off of your wrist, face the 9:00 position towards the radio wave transmitter
station and place the watch in a stable location that allows radio waves to be received
easily such as near a window. Do not move the watch during radio wave reception.
1. Press button (A) for at least 2 seconds, and release your finger after the second hand has
stopped at the RX (12:00) position.
2. The second hand then moves from RX to H, M or L to indicate that reception is in progress.
3. When reception is completed, the second hand returns from H, M or L and resumes 1-
second interval movement (within a maximum of 15 minutes).
[Reception Standby]
[Reception in Progress]
RX (reception
RX
RX
standby)
MON
7
MON
Button (A)
* Refer to page 76 on "Reception of Radio Waves" for further details on the reception procedure.
[Reception Completed]
Reception
RX
level (H, M
or L)
Second hand
7
MON 7
resumes
1-second
interval
movement
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents