Citizen Eco-Drive Manual page 28

<Temperature>
The function of the watch may be impaired or the watch may even stop if the ambient
L
temperature is outside the range of -10°C to +60°C. Avoid using the watch in a
manner outside the range of the specifications.
<Magnetism>
Analog quartz watches are powered by a step motor that uses a magnet. Subjecting the
L
watch to strong magnetism from the outside can cause the motor to operate improperly
and prevent the watch from indicating the correct time. Do not allow the watch to
come into close proximity to magnetic health devices (magnetic necklaces, magnetic
elastic bands, etc.) or the magnets used in the latches of refrigerator doors, clasps used
in handbags, the speaker of a cell phone, electromagneticcooking devices and so on.
<Static Electricity>
The integrated circuits (IC) used in quartz watches are sensitive to static electricity.
L
Please note that the watch may not indicate the correct time if exposed to intense static
electricity.
<Strong Shocks>
Do not allow the watch to be dropped or subjected to strong impacts.
L
110
<Chemicals and Corrosive Gasses>
If paint thinner, benzene or other solvents or products containing these solvents
L
(including gasoline, nail-polish remover, cresol, bathroom cleaners and adhesives) are
allowed to come into contact with the watch, they may discolor, dissolve or crack the
materials. Be careful when handling these chemicals.
<Storage>
If you will not be using your watch for an extended period of time, carefully wipe off
L
any perspiration, dirt or moisture and store in a proper location, avoiding locations
subject to excessively high or low temperatures and high humidity.
If you will not be using your watch for an extended period of time, it is recommended
L
to store the watch while avoiding direct sunlight as much as possible. In addition,
continuous operation time will be longer if you set your watch to the reference position
check mode before storing.
111