Setting Procedure For Time Difference Correction - Citizen A414 Instruction Manual

B. Setting Procedure for Time Difference Correction (2)
The time difference can be corrected for 30 seconds after pressing button (A) or for
30 seconds following completion of hand movement after the crown has been
pulled out to the first position. The date also changes in coordination with the hour
hand.
Crown pulled out
to first position
Crown returned to
normal position
Button
(A)
30
(A)
Date correction
Hour hand/day
(elapsed
disk correction
years/month)
(Demonstration
movement by
hour hand)
Returns automatically after 10 seconds or button (A)
pressed
(1) Pull the crown out to the first position.
· The second hand moves to the position of the "year" and "month" stored in
memory and then stops.
(2) When button (A) is pressed, the hour hand performs demonstration movement
after which the watch changes the "hour" and "date" time difference correction
state.
· The second hand rapidly returns to the current time and the watch begins to run.
(3) Turn the crown to set to the "hour" of the region for which time difference is to
be set.
If turned to the right (by one click), the hour hand moves forward (clockwise)
by one hour.
If turned to the left (by one click), the hour hand moves backward (counter-
clockwise) by one hour.
· Turning the crown continuously (by two clicks or more) causes the hour hand to
(A)
move continuously.
· Continuous movement can be interrupted by clicking the crown by one click to
the left or right.
31