Cisco PenTeleData IP DECT 6825 Series User Manual page 20

Call Screening – Custom Number
If you want to screen calls from a specific number, you can use the Custom Call Screening feature to control who
can call your phone and what happens when they do. This can be done via the online voice portal or star code.
Allow Custom Caller
If you have blocked all callers and want to allow a specific caller to contact you, use this feature.
Step 1 Dial *59
Step 2 Enter your voicemail PIN followed by #.
Step 3 Enter the number to be blocked followed by #.
• You will hear a prompt saying, "Calls from [phone number you entered] will be allowed".
Block Custom Caller
If you have allowed all callers and want to block a specific caller, use this feature. The caller will hear a busy signal
instead of reaching you.
Step 1 Dial *60
Step 2 Enter your voicemail PIN followed by #.
Step 3 Enter the number to be blocked followed by #.
• Be sure to include "1" before the 10-digit phone number.
• You will hear a prompt saying, "Calls from [phone number you entered] will be blocked".
Block Custom Caller with Message
The caller will hear a message indicating that calls are not being accepted at this time.
Step 1 Dial *58
Step 2 Enter your voicemail PIN followed by #.
Step 3 Enter the number to be blocked followed by #.
• Be sure to include "1" before the 10-digit phone number.
• You will hear a prompt saying, "Calls from [phone number you entered] will be blocked".
Note: The message the caller will hear is "The number you have dialed is not accepting calls at this time.
Please try again later."
Mute Your Call
While you are on a call, you can mute the audio so that you can hear the other person, but they cannot hear you.
Procedure
Step 1 Press Mute
Step 2 Press Mute again to turn mute off.
20 | P a g e
Procedure
Procedure
Procedure
.
Cisco IP DECT 6825 Series User Guide