Cisco PenTeleData IP DECT 6825 Series User Manual page 19

Enable/Disable Anonymous Call Block
Anonymous caller will hear a busy tone.
Step 1 Dial *77 to enable Anonymous Call Block.
• You will hear a prompt saying, "Your anonymous call rejection service has been activated. All incoming
calls will be checked for number privacy before they are allowed to complete to your line".
Step 2 Dial *85 to disable Anonymous Call Block.
• You will hear a prompt saying, "Your anonymous call rejection service has been deactivated".
Enable/Disable Anonymous Call Block with Message
Anonymous caller will hear a message indicating anonymous callers are not allowed.
Step 1 Dial *95 to enable Anonymous Call Block with Message.
• You will hear a prompt saying, "Your anonymous call rejection service has been activated. All incoming
calls will be checked for number privacy before they are allowed to complete to your line".
Step 2 Dial *85 to disable Anonymous Call Block with Message.
• You will hear a prompt saying, "Your anonymous call rejection service has been deactivated".
Call Screening – All Callers
If you don't want to receive calls from anyone, you can use this feature and then enable only specific callers to
reach you (see
Step 1 Dial *64 to enable All Other Callers Block.
• You will hear a prompt saying, "Your selective call accept service has been activated".
Step 2 Dial *74 to disable All Other Callers Block.
• This will allow calls from everyone NOT specifically blocked.
• You will hear a prompt saying, "Your selective call accept service has been deactivated".
19 | P a g e
Procedure
Procedure
Allow Custom Caller).
Procedure
Cisco IP DECT 6825 Series User Guide