Cisco PenTeleData IP DECT 6825 Series User Manual page 11

The battery contacts are on the top left edge of the battery and the top left edge of the battery
compartment. Ensure that the contacts meet and that the battery is seated in the compartment.
Step 5 Replace the battery cover, make sure that the cover is closed, and turn the latch clockwise to the locked
position.
Don't force the cover closed. If it doesn't close easily, take it off and check that the battery is completely
seated in the battery compartment.
What to do next
Before you use the handset, you need to charge it.
Handset Battery Charging
Set Up the Charging Cradle
You use the charging cradle to charge the handset. The cradle has a built-in USB cable that plugs into the
power adapter. The power adapter is designed for your country's electrical outlet configuration and power
rating.
Procedure
Step 1 Place the cradle on a level surface.
Step 2 Plug the USB connector of the power cord into the power adapter.
Step 3 Plug the power adapter into the electrical outlet.
11 | P a g e
Cisco IP DECT 6825 Series User Guide