Cisco PenTeleData IP DECT 6825 Series User Manual page 14

Caller ID
Outbound Caller ID
The caller ID number sent with outbound calls is set on each user. Users can send out the main company
number, a specific user-assigned number, or not send out any caller ID.
Note: Calls to 911 ignore the caller ID settings of the user and send the 911 callback number set on the device.
Internal Caller ID
When calling another user on your PBX, the user's extension with their name is the caller ID.
Caller ID Block per Call
Prevents your caller ID (name and number), from being displayed to the next person you call.
Procedure
Step 1 Lift the receiver.
Step 2 Dial *67.
Step 3 Wait for a second dial tone.
Step 4 Dial the number of the party you're trying to reach.
• Your caller ID will not be displayed to the party you called.
• Your caller ID will be displayed on future calls.
Unblock Caller ID per Call
To allow your caller ID to be sent to the person you dial:
Procedure
Step 1 Lift the receiver.
Step 2 Dial *65.
Step 3 Wait for a second dial tone.
Step 4 Dial the number of the party you're trying to reach.
• Your caller ID will be displayed to the party you called.
• Your caller ID will not be displayed on future calls.
Speed Dial
If you make frequent calls to specific phone numbers, you can set up your handset for speed dials. You can
set up to 8 speed-dial numbers.
Assign a Speed-Dial Code from the Phone Screen
You can assign a speed-dial number to a contact. You assign speed dials to entries 2 to 9. Entry 1 is used for
your speed dial to voicemail.
Before you begin
You need at least one contact in your Contacts list.
Procedure
Step 1 Press Contacts.
Step 2 Highlight the contact.
Step 3 Press More.
Step 4 Select Speed Dial.
14 | P a g e
Cisco IP DECT 6825 Series User Guide