Mounting The Switch On A Workbench - H3C S5820X-28C Manual

Figure 17 Installing the switch in the rack

Mounting the switch on a workbench

CAUTION:
Ensure 10 cm (3.94 in) of clearance around the switch.
•
Do not place heavy objects on the switch.
•
If a standard 19-inch rack is not available, you can place you switch on a
workbench. The S5820X-26S switch cannot be mounted on a workbench.
To mount the switch on a workbench:
1. Make sure the workbench is clean and correctly grounded.
2. Place the switch with bottom up carefully, and clean the round holes on
the chassis bottom with dry cloth.
3. Attach the rubber feet to the four round holes in the chassis bottom.
4. Place the switch with upside up on the workbench.
13