Lexmark C4342 User Manual page 83

Use printer menus
Menu item
Device Operations
Quiet Mode
Off*
On
Device Operations
Panel Menus
Off
On*
Device Operations
Safe Mode
Off*
On
Device Operations
Clear Custom Status
Device Operations
Clear all remotely‑installed messages
Device Operations
Automatically Display Error Screens
Off
On*
App Configuration
LES Applications
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Out of Service Erase
Menu item
Out of Service Erase
Memory Last Sanitized
Hard Disk Last Sanitized
Description
Change the amount of noise that the printer produces.
Note: Enabling this setting slows down the overall
performance of the printer.
Enable access to the printer menus from the control panel.
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
Erase user‑defined strings for the Default or Alternate custom
messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time.
Enable Lexmark Embedded Solutions (LES) applications.
Description
Show a read‑only information on when the printer
memory or storage drive was last erased.
Note: Hard Disk Last Sanitized appears only when a
storage drive is installed.
83