Table of Contents
Advertisement
Troubleshoot a problem
Error codes
59
61
62
63
80.01, 80.09
80.11, 80.19
80.21, 80.29
80.31
82.00, 82.02, 82.09
82.12, 82.13, 82.19, 82.20, 82.22,
82.23, 82.29
82.30, 82.30, 82.33, 82.39, 82.40,
82.42, 82.49
Error message
Incompatible tray [x].
Defective disk.
Disk full.
Format the disk.
Maintenance kit nearly low. Touch Continue to clear the
Maintenance kit low.
Maintenance kit very low.
Replace maintenance kit,
recommended life exceeded.
Waste toner bottle nearly
full.
Waste toner bottle almost
full.
Replace waste toner bottle. See
Solution
1
Turn off the printer, and then
unplug the power cord from the
electrical outlet.
2
Remove the indicated tray.
3
Connect the power cord to the
electrical outlet, and then turn on
the printer.
CAUTION—SHOCK
HAZARD: To avoid the risk of fire or
electrical shock, connect the power
cord to an appropriately rated and
properly grounded electrical outlet
that is near the product and easily
accessible.
Replace the defective storage drive.
Try one or more of the following:
•
Touch Continue to clear the
message.
•
Delete fonts, macros, and other
data stored in the printer hard
disk.
•
Install a printer hard disk.
Formatting now wipes all information
from the storage drive.
To format the storage drive later, do
the following:
1
From the home screen, touch
Settings > Device >
Maintenance > Out of Service
Erase.
2
Touch Sanitize all information
on hard disk, and then touch
ERASE.
message.
See
"Ordering a fuser maintenance
kit" on page
121.
Touch Continue to clear the
message.
"Replacing the waste toner
bottle" on page
144.
169
Advertisement
Table of Contents
