Safety Instructions - CompuLab fitlet3 Owner's Manual

Safety instructions

Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your
personal safety. Unless otherwise noted, each procedure included in this document assumes that you have read the
safety information that shipped with your computer
WARNING
computer cover or panels. After you finish working inside
the computer, replace all covers, panels, and screws
before connecting to the power source.
CAUTION
service
troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or
telephone
servicing, that is not authorized by Compulab, is not
covered by your warranty. Read and follow the safety
instructions that came with the product.
CAUTION
internal components damage from electrostatic discharge when
touching computer or its parts, ground yourself by using a
wrist grounding
unpainted metal surface, such as a connector on the back of
the computer.
CAUTION
touch the components or contacts on a card. Hold a card by
its edges or by its metal mounting bracket. Hold a component
such as a processor by its edges, not by its pins.
CAUTION
or on its pull-tab, not on the cable itself. Some cables
have connectors with locking tabs; if you are disconnecting
this type of cable, press in on the locking tabs before you
disconnect the cable. As you pull connectors apart, keep
them evenly aligned to avoid bending any connector pins.
Also, before
connectors are correctly oriented and aligned.
www.fit-iot.com
: Disconnect all power sources before opening the
: Some repairs may only be done by a certified
technician.
service and
: To avoid electrostatic discharge and prevent
strap
: Handle components and cards with care. Do not
: When you disconnect a cable, pull on its connector
you connect
Tel: +972-48-290-168 | Fax: +972-48-325-251 | www.fit-iot.com
You should
support team.
or by periodically
a cable,
Page 2 of 22
Hayetsira St. 17, Yokneam, Israel
only perform
Damage due
touching
ensure that
fitlet3 owner's manual
to
an
both