CompuLab fitlet3 Owner's Manual page 13

3. Place edge of M.2 SSD against the fastening screw
a. Press the SSD firmly against the thermal pad until its connector edge
is seated between the alignment pins.
Once positioned correctly the connector edge should stick out above
the edge of the M.2 cooling plate.
4. Tighten the fastening screw
5. Turn over the M.2 cooling plate and push the M.2 SSD into its socket
at the underside of the motherboard.
www.fit-iot.com
Tel: +972-48-290-168 | Fax: +972-48-325-251 | www.fit-iot.com
Page 13 of 22
Hayetsira St. 17, Yokneam, Israel
fitlet3 owner's manual