MSB Technology Select DAC User Manual page 13

Setup Menu Continued...
Input
switching
Restore
DAC
settings
Renderer
Remote
Analog Off (Default)
About
screen
DAC
Software
Input A - D Lists the installed input module in slot A, B, C, and D.
Output Displays the current output module installed and the
Manual with smart
• Only allows manual switching between active and
previously active inputs. The 'Auto' mode is not available.
Auto with smart (Default)
• Allows manual and auto switching between active and
previously active inputs.
Auto with all inputs
• Allows manual and auto switching between all installed
inputs.
Confirm
• This restores the DAC to default settings.
Enable
• The transport buttons on the remote work to control
renderer functionality
Disable
• The transport buttons on the remote only work for
the transport
• Disables the analog input.
On-Volume Controlled
• Enables the analog input and uses the volume control.
On-Volume Bypass
• Enables the analog input and bypasses the volume
control.
This screen displays the serial number, year of
manufacture, and distributor name of the DAC.
This screen displays the current revision # of firmware
installed in the DAC.
If a Network Renderer is installed this screen will display
the currently used Network IP address of the module.
output impedance.