Related Manuals for MSB Technology The Reference DAC
Summary of Contents for MSB Technology The Reference DAC
- Page 1 The Reference DAC User Guide Check our website for the most recent user guides, firmware and drivers at: www.msbtechnology.com Technical support email is: Hello@msbtechnology.com 04.12.2023...
- Page 3 Any Reference DAC support videos, as well as other related product videos, can be found online by visiting the URL listed below or by scanning the following QR Code. https://www.youtube.com/ playlist?list=PLA1wHoJozHNeXUpdBSSQEiGtsaQHHggjT This user guide is modeled after the following firmware revisions: The Reference DAC: 31.21 The Reference Digital Director: 11.11...
-
Page 4: Setup And Quick Start
Hybrid Power cables. Use both cables to connect each of the power connectors located on the Reference Powerbase to both of the power connectors located on the back of the Reference DAC. How to Disconnect Hybrid Power Cables To disconnect a Hybrid Power cable, simply pinch the collar portion of the cable where the arrow symbol is located and pull the collar of the cable directly back from the jackpanel. - Page 5 Step 3. Connect the Analog outputs of your Reference DAC to the power amplifier(s) in your audio system. Step 4. Connect all of your desired digital audio sources to the matching digital inputs on your Reference DAC. The DAC will automatically switch to any active digital input source.
- Page 6 DAC User Interface Menu The Menu button is single purpose. It will enter the Button setup menu at the top of the menu tree. If in the setup menu (it doesn’t matter where) this button will exit the setup menu and return to the normal audio listening function.
- Page 7 Reference Powerbase The powerbase contains isolation technology. The powerbase detects the input voltage and switches to 120 volt or 240 volt operation. It is also available in a fixed 100 volt configuration. The Reference powerbase has over-voltage protection. Two fuses are provided: - 5A 250V SLO BLO - 5 mm x 20 mm miniature fuse (This is the main fuse).
- Page 8 The MSB Remote Power On/Off Powerbase on and off. When the powerbase is linked to an amplifier or MSB product, this button will turn off the entire system Indicator LED While in use: White - Command Sent Red and White - Command Sent and Low Battery Red Flashing - Needs Charging While charging:...
-
Page 10: Phase Invert
Saving Menu and Startup Settings When changing settings in the menu, use the enter button in the center of your volume wheel on the remote, or the right arrow on the DAC faceplate to confirm settings in the DAC menu. After you have made your changes in the DAC menu, use the menu button to exit the DAC menu completely to save the changes you have made while in the DAC menu. - Page 14 About the Four Input Module Slots The DAC has four input module slots. They are labeled A through D. Input modules can be placed in any position. Each module is completely self contained. It is recognized by the DAC and identified on the display.
- Page 15 Available Digital Input Modules If the standard digital inputs available on the Reference DAC do not fulfill your full digital input requirements, a list of the currently available modules and their intended uses are listed below. A full digital list of these inputs, as well as a comprehensive list of pros and cons for each input format, can be found on our website by scanning the QR code or visiting the URL listed below.
-
Page 16: Updating Firmware
Updating Firmware The following firmware instructions are for updating DAC and Digital Director firmware. If you do not have a Digital Director installed in your system, then ignore any Digital Director instructions. The firmware files are .WAV audio files. Updating DAC Firmware - Before Digital Director Install To start, if you have not installed your digital director in your system, first begin by updating the DAC firmware. - Page 17 Updating Firmware with a Digital Director (cont.) Now, play the DAC firmware update. After the DAC firmware is installed and complete, you can now play the Digital Director firmware. Finally, go back into the menu and enable the Digital Director filtering again. After the firmware updates are complete, you can check for a successful connection between the Digital Director and DAC indicated by a small “+”...
- Page 18 Reference Powerbase - Advanced Setup The Reference Powerbase comes with a few features that are not required for basic operation. These features are mainly used for altering your system setup and slight ease-of-use improvements. The 12-volt trigger is a network of 3.5mm mini-jack connections that can make your Reference Powerbase power button turn on/off your MSB amplifier(s) using the power button located on the faceplate or the power button on your remote to create a single power control for your...
- Page 19 Shielding Ground - Enhanced Operation The Enhanced Operation provides isolation for both the DAC and the amplifier. This gets you the full isolation available. With the jumper disconnected, connect the supplied ground wire from the AMPLIFIER GROUND lug to the chassis of the amplifier. Note this connection is dependent on the amplifier, so you will have to look for the best place to attach the wire.
- Page 20 Reference DAC Specifications Supported Formats 44.1kHz to 3,072kHz PCM up to 32 bits (Input depedent) 1xDSD, 2xDSD, 4xDSD, 8xDSD Supports DSD via DoP on all inputs Digital Inputs 4x Advanced isolated input module slots XLR Analog Inputs 100K Ohm Balanced 12Vrms Maximum Isolated when not selected XLR Analog Outputs 3.57Vrms Maximum (Digital Input)
- Page 21 Reference Powerbase Specifications AC Voltage 120/240V (Auto switching) Optional 100V fixed configuration Power Consumption 90 Watts with fully configured Reference DAC Less than 2W standby Chassis Dimensions Width: 17.5 in (444 mm) Depth: 17.5 in (444 mm) Height without feet: 2.2 in (56 mm) Stack height: 2.85 in (72 mm) Weight: 45 lbs (20 kg) Shipping Dimensions Width: 23 in (585 mm)
-
Page 22: Technical Support
Technical Support If you are experiencing any issues with your MSB product, please contact your nearest dealer or try our support page at www.msbtechnology. com/support. Please be sure you have the most current edition of your products’ firmware installed. If your issue persists, please feel free to contact MSB directly. - Page 23 The Reference DAC Limited Warranty Warranty includes: • MSB warranty covers the unit against defects in materials and workmanship for a period of 3 years from the date the unit was originally shipped from MSB. • This warranty covers parts and labor only; it does not cover shipping charges or tax/duty.