Program End; Removing The Laundry; Care Notes - Miele PDR 914 Operating And Installation Instructions

Drying

Program end

Removing the
laundry

Care notes

24
The tumble dryer's electronic adapts during the ongoing drying pro-
gram. The displayed program duration becomes more and more ac-
curate.
When using the programs for the first time, the displayed time
sometimes deviates significantly from the real time left. The differ-
ence between the estimated and achieved time becomes smaller if
the corresponding program is run more often. If different load sizes
are dried in one program, the time left display can only show an ap-
proximate time.
Program end
The laundry will be cooled down shortly before the end of the pro-
gram. The message
during the cooling phase. The laundry can now be unloaded.
After the cooling phase and the drying program is completed, the
Finish
message is displayed.
The tumble dryer will switch off automatically after the set time after
the end of a program.
If the Anti-crease * option has been selected, the drum continues
to rotate in intervals. This reduces creasing if the laundry cannot be
unloaded straight away.
* The Anti-crease function is switched off as the factory default set-
ting and can be activated in the Supervisor level.
Open the door.

Remove everything from the drum.

Items left in the dryer could be damaged by over-drying when the
dryer is used the next time.
Always remove all items from the drum.
Switch the tumble dryer off by pressing the  button.

This tumble dryer requires regular maintenance, particularly if it is
used on a continuous basis. Please see "Cleaning and care" for de-
tails.
Finish/Cooling down
will appear on the display