Supervisor level
* The maximum program duration is specified during initial commissioning.
-
Laundromat Logo int. time
4 timed-drying programs* with different temperature levels are time-controlled via the
tumble dryer's electronic.
The set value indicates the maximum program duration and can be modified by the user.
* The maximum program duration is specified during initial commissioning.
External prog. selection
-
A communication module can be used to select the program from an external terminal.
Program packages
This allows you to specify the scope of the tumble dryer's program. You can select all of
the programs or individual programs from the relevant program packages.
The tumble dryer's additional scope of programs can be configured. The programs are
listed under "Program overview".
Favorite programs
After switching on, you can also select a program via: Favorites.
12 programs can be stored as favorites based on your own priorities and requirements.
These favorite programs will also be made available in the control options
- Laundromat ext. (12 prog)
- Laundromat, basic (4 prog) (the first 4 of the 12 favorite programs).
You can specify the control option under
Tip: You can assign a different color to each program. In this case, the Program color allo-
cation setting must be set to On.
Changing Favorite programs
Select the program you wish to change or replace.
Confirm the program or the setting to be changed.
Another menu opens, enabling you to select a new program or change the parameters.
Confirm with the
Your selection is now active.
Special programs
You can put together 5 special residual-moisture or time-controlled programs and assign
your own program names.
First, enter the program name.
Select the special program you want to change.
Save as
The
menu opens.
Use the letters and symbols below the line to enter the name.
Save
Touch the
sensor control.
42
Save
sensor control.
Controls
.