Transporting The Printer - Epson STYLUS PHOTO 895 Manual

Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Caution:
c

Transporting the Printer

If you need to transport your printer, carefully prepare and repack
it as described below using the original box (or a similar box that
the printer fits snugly into) and packing materials. Follow the
steps below.
1. Open the printer cover and make sure that the print head is
in the home (far right) position. If not, plug in the printer, wait
until the print head returns to the home position, then close
the printer cover and unplug the printer.
c
2. Disconnect the interface cable from the printer.
R4C706
long.bk
A5 size
7/19/01
Be careful not to wipe grease on the metal parts under the
ink carriage passage.
Never use alcohol or thinner to clean the printer, as these
chemicals can damage the components as well as the case.
Be careful not to get water on the printer mechanism or
electronic components.
Do not use a hard or abrasive brush.
Do not spray the inside of the printer with lubricants.
Unsuitable oils can damage the mechanism. Contact your
dealer or a qualified service person if lubrication is needed.
Only use a dry, soft cloth to clean the display and the optional
Preview Monitor. Do not use liquid or chemical cleansers.
Caution:
Leave the ink cartridges installed when you transport the
printer. Transporting the printer without cartridges in place
can damage the printer.
Rev. C
MAINT.FM
9-11
Maintenance
R